If you’re having trouble protecting your MSD (Moisture Sensitive Devices) from moisture-related damage, you’re on the right page. In this article, we are going to shed some light on the importance of electronic dry cabinets.
Basically, a dry cabinet is an enclosure that can prevent electronic components from being exposed to excessive moisture environment. People use them when they need to put their moisture sensitive products in a low humidity environment.
We know that excessive moisture can damage specific products, such as PCBs, ICs, chips, optical products, and precision instruments. Since humidity can have a negative impact on the performance of the device and cause it to malfunction in some cases, it is important to keep them in a place where these problems do not occur.
Without further ado, let’s find out why you might want to invest in a dry cabinet to suit your needs.
Importance of investing in a Dry Cabinet
Why do professional manufacturers use a dry cabinet to store their MSDs? The short answer is that they want protection against fungus. In fact, fungi are the worst enemy of the electronic manufacturing process. It is not easy to eliminate fungi and it can also cause damage and great economic losses to the products.
The problem is that mold and moisture can directly cause damage and cracks inside electronic components and other moisture sensitive materials. This can happen if you store electronic components and do not take steps to protect them from unwanted elements such as mold and moisture. As soon as the fungus grows, you will not be able to stop it from spreading rapidly.
If you think you can clean fungus from printed circuit boards, you should think again. The reason is that it may have a damaging effect on small components on PCB boards and too much work with excessive labor cost. Therefore, we do not recommend that you go this route.
Often manufacturers who have access to dry cabinets end up storing their components in exposed workshops. Usually, fungus tends to thrive in these areas due to high humidity. Generally, these people live in areas where humidity remains high throughout the year.
Keep in mind that these can be a great option for manufacturers of electronics and semiconductors. Make sure that the equipment you have stored is free of dust and water vapor. And this can only be done if you invest in good dry cabinets. These devices can be set to control humidity and prevent it from going overboard.
Additional Tips:
If you want to store your MSDs (Moisture Sensitive Devices) in dry cabinets, make sure to choose an optimum humidity point, don’t keep the humidity level too low or too high.
The dry modules are also very essential, if the life of the dry module is short, then you need to replace it once two years or three years, it will cause high cost and long time.
Often, removing the fungus from your MSD costs a large sum of money. In addition to this, the treatment may not be 100% effective. As a result, you can end up with a long downtime.
In a nutshell, here are some of the reasons why you might want to invest in a good dry cabinet to store your expensive electronics like cameras.