DPF Service
In order to maximize your vehicle’s fuel economy, you need to regularly clean and maintain your DPF filter. It will not only save you money on fuel, but it will also protect your engine. A dirty filter can hinder regeneration. Other factors that affect regeneration include excessive idling, cold & severe duty cycles, and broken exhaust pipes. Regeneration alone will not provide consistent results, so most leading aftermarket manufacturers recommend a baking cycle before regeneration. This method takes the guesswork out of DPF maintenance and repair.
A DPF service will include a diagnostic check and repair to fix any defects in your DPF. It will also involve cleaning and repairing worn-out parts, including gaskets and clamps. A specialized tool is used to clean the DPF. Depending on the type of DPF More Details, a service can be performed passively or forced.
The difference between passive and active regeneration is the amount of soot that gets accumulated in the DPF. The differential pressure method evokes regeneration only when enough soot blocks exhaust flow or reduces engine performance. The other two methods are based on no metric and rely on engine settings and the operating state of the car. Passive regeneration is performed when the engine is under a load while active regeneration is performed when the vehicle is stopped.
What Is DPF Service?
The process of cleaning a DPF filter involves using a surfactant. This helps to remove the ash particles that are in the DPF. After cleaning, the DPF is dried in a special cabinet. The process can take as little as two hours with the right equipment. However, cleaning a DPF by yourself is not recommended. It is possible to damage your vehicle’s DPF if you attempt it. You should also avoid using pressure washers, as they may damage it.
Most DPFs will last over 100,000 miles if they are well maintained. But if they do not receive the correct use, the DPF may not last that long. Many carmakers have built in active regeneration to combat this problem. When a blockage occurs in the DPF, the engine’s control software will detect this and inject extra fuel to raise the exhaust temperature. This extra fuel will then trigger regeneration.
A DPF service should be performed if it becomes blocked. If you cannot regenerate the filter yourself, you should visit a technician who will perform the necessary work. Regeneration will help clean out the soot in your DPF filter. In extreme cases, the filter will need to be replaced. This can cost as much as PS1000 plus labour. However, most blockages occur within a short period of time. A blockage in your DPF will cause the engine management light to illuminate.
A DPF service is necessary if you want to avoid costly repairs. As soot builds up inside the filter, it can cause your engine to lose power and fuel economy. In addition, you may notice that your vehicle has an orange warning light. It’s a good idea to schedule routine maintenance to prevent future problems and increase your vehicle’s performance and fuel efficiency.